Complete SAN Flash Storage Without Compromise
With no single point of failure and 2D Flash RAID™, the RamSan-720 is perfect for multitenant heterogeneous applications that lack built-in high availability.
The RamSan-720 is the first high availability storage device from Texas Memory Systems. With no single point of failure, 2D Flash RAID™, and latency under 100 µs, the RamSan-720 is the ultimate in performance and data protection.
Some applications provide high availability features in software, which is usually sufficient when a single application is run on a RamSan. However, software-based high availability is not an option when running multiple applications. In addition, some applications (like cloud platforms and virtualization environments) lack built-in high availability. The RamSan-720 is the high performance answer for providing hardware based high availability for heterogenous multitenant applications.
The RamSan-720 boasts the following high availability features:
- No single point of failure (SPOF)
- Four layers of data correction, including 2D Flash RAID™
- Fully redundant components (providing redundant power, data, and management paths)
- Hot swappable Flash Modules
- Low-power components that run cooler than competitors (addressing the problem of premature Flash failure due to excessive heat)
Since the RamSan-720 uses hardware to provide these features, this SSD does not suffer a hit in performance, unlike competitors that supply high availability through software. In fact, the RamSan-720 generates similar performance numbers to its RamSan-710 sibling: 400,000 IOPS and 5 GB/s bandwidth. The RamSan-720 also boasts write latency numbers that rival RAM-based storage: only 25 µs (with 100 µs read latency).
Storage
- Capacity (Usable): 6 - 12 TB
- LUNs: 1,024 LUNs
- Storage Medium: SLC Flash
Performance
- Maximum Bandwidth: 5 GB/s
- Read IOPS: 400 K IOPS
- Read Latency: 100 microsecond
- Write IOPS: 400 K IOPS
- Write Latency: 25 microsecond
Interfaces
- Expansion Slots: 2 slots
- Fibre Channel Ports per Card: 2 ports/card
- Fibre Channel Speed per Port: 8 Gb/s
- InfiniBand Channel Width: 4 links
- InfiniBand Channels per Card: 2 channels/card
- InfiniBand Data Rate Standard: QDR
- InfiniBand Speed per Channel: 40 Gb/s
Management
- Supports Browser Management
- Supports SNMP Management
- Supports SSH Management
- Supports Telnet Management
Power
- Typical Power Consumption: 400 W
Mechanical
- Dimensions: 1.75" (1U) x 25"
- Form Factor: 1U
- Weight: 35 lbs
